How much water can a new irrigation system save in a typical Northern Colorado yard?

AGT's smart irrigation systems, equipped with EPA WaterSense controllers and soil-moisture sensors, can cut outdoor water use by up to 40 percent for residential properties. Homes that also convert turf areas to xeric or native planting zones and pair them with inline drip emitter tubing tend to see the greatest savings. The exact amount depends on your current setup, yard size, and how well the existing system is calibrated, which is why AGT includes a full efficiency audit with every installation.

What is the difference between MP Rotator heads and standard spray heads, and which is better for my lawn?

Standard spray heads release water in a fixed fan pattern at high volume, which can lead to runoff and pooling on Colorado's clay-heavy soils. MP Rotator heads deliver water in slow, rotating streams at a much lower application rate, giving the soil time to absorb moisture before the next pass. This makes them a better fit for the Front Range, where clay compaction is common and water restrictions are strict. AGT specifies MP Rotators for turf zones as a standard practice to improve efficiency and reduce waste.

When should I schedule spring irrigation activation, and why does timing matter in Colorado?

AGT schedules spring activation appointments in May to reduce the risk of a late-season freeze damaging pressurized lines. Colorado's weather can shift dramatically in April, with warm stretches followed by hard freezes well into spring. Activating too early and leaving water in the lines overnight during a freeze can crack pipes and damage heads, leading to costly repairs. Scheduling in May gives the system a reliable window to be pressurized, tested, and adjusted before peak watering season begins.

Do you handle the water-use documentation required by Boulder or Fort Collins for irrigation projects?

Yes. AGT manages all compliance documentation as part of the project scope. For properties in Boulder, that includes water-use reports required under Boulder 1041 regulations. For Fort Collins properties, we prepare documentation aligned with Fort Collins Water Wise requirements. After installation, every project receives CAD-based as-built plans that show valve locations and sleeve routes. These documents are useful for future maintenance, HOA reviews, and any municipal inspection that may be required.

What does compressed-air winterization involve, and is it necessary every year?

Winterization, also called a blow-out, uses compressed air to push all remaining water out of the irrigation lines before the first hard freeze. In Northern Colorado, leaving water in the lines through winter is a reliable way to crack pipes and damage heads due to the region's frequent freeze-thaw cycles. AGT recommends annual blow-outs for every system we maintain. The process is quick, and skipping it even once can result in repair costs that far exceed the cost of the service itself.

Can AGT retrofit my existing sprinkler system with a smart controller, or does the whole system need to be replaced?

In many cases, a smart controller retrofit is possible without replacing the full system. AGT can assess your existing infrastructure and upgrade the controller to an EPA WaterSense certified unit that adjusts run times based on real-time weather data and soil-moisture readings. If the existing heads or zone layout are inefficient, we will recommend targeted upgrades rather than a full replacement. A site assessment is the best way to determine what your current system needs to perform well under Colorado's water restrictions and soil conditions.

What warranty does AGT offer on irrigation installations, and what does it cover?

AGT provides a 2-year warranty on all irrigation installations, which is double the one-year industry standard. The warranty covers installed system components and workmanship. Because AGT also offers ongoing irrigation maintenance services, the same team that installs your system can monitor its performance through seasonal activations, mid-season audits, and fall winterizations. This continuity means issues are caught early and the system is kept in good working order throughout its service life.

Irrigation Systems | Longmont, CA

High water bills, brown patches, and failing sprinkler heads are common frustrations for homeowners across Boulder, Larimer, and Weld County. AGT Landscape & Design provides residential irrigation design and installation built specifically for Front Range conditions: clay-heavy soils, intense high-altitude UV, and 70-plus freeze-thaw cycles every year. From EPA WaterSense smart controllers to precision drip rings and MP Rotator spray heads, every system we install is engineered to deliver water where it is needed and cut waste where it is not.

Generic irrigation systems fail in Northern Colorado because they ignore the region's specific challenges. Expansive clay soils waterlog easily, high-altitude UV degrades equipment faster, and unpredictable weather patterns can swing from 70-degree warmth to a March blizzard in days. AGT's residential irrigation design and installation process starts with a full site assessment covering sun angles, soil structure, and existing drainage patterns. We then specify the right hardware for each zone, including pressure-regulated point-source emitter drip rings for garden beds and MP Rotator heads for turf areas. The result is a system that performs reliably through Colorado's volatile seasons while keeping water use in check.

Upgrading to a smart irrigation system in Boulder or anywhere along the Front Range can cut outdoor water use by up to 40 percent. AGT installs EPA WaterSense certified controllers that adjust run times automatically based on real-time weather data and soil-moisture readings. Paired with inline emitter tubing for planting beds and MP Rotator heads for turf zones, these systems deliver water directly to root zones while minimizing evaporation. Smart irrigation audits are included to verify efficiency mid-season, and our teams can also retrofit existing systems with WaterSense controllers so you get the savings without a full reinstall. For homeowners navigating Boulder 1041 or Fort Collins Water Wise requirements, we handle all compliance documentation as part of the project.

An irrigation system is only as good as the care it receives between seasons. AGT provides complete irrigation maintenance services throughout the year, starting with spring activation and efficiency audits scheduled in May to protect against late-season freeze risk. Mid-season checks confirm that heads are adjusted, pressure is balanced, and smart controllers are responding accurately to weather data. In the fall, our crews perform compressed-air winterization blow-outs to clear lines before the first hard freeze. Because AGT designs, installs, and maintains every system we build, there are no hand-offs between contractors and no gaps in accountability. Our 2-year warranty on irrigation installations, double the industry standard, backs that commitment with real protection.

AGT Landscape & Design is locally owned and operated by Alex Tanner, dispatched from Longmont and Berthoud, and licensed as a Colorado Pesticide Applicator. Our crews carry OSHA 10 cards and the company maintains $5 million in general liability coverage. We serve homeowners throughout Boulder, Larimer, and Weld County, including Boulder, Erie, Lafayette, Louisville, Superior, Loveland, Fort Collins, Windsor, Niwot, and Broomfield. Every irrigation project includes CAD-based as-built plans showing valve locations and sleeve routes, plus a water-use report for any municipality that requires one. When you hire AGT for irrigation system installation in Northern Colorado, you get a team that knows the soil, understands the regulations, and stands behind the work long after the last head is set.

How much water can a new irrigation system save in a typical Northern Colorado yard?
AGT's smart irrigation systems, equipped with EPA WaterSense controllers and soil-moisture sensors, can cut outdoor water use by up to 40 percent for residential properties. Homes that also convert turf areas to xeric or native planting zones and pair them with inline drip emitter tubing tend to see the greatest savings. The exact amount depends on your current setup, yard size, and how well the existing system is calibrated, which is why AGT includes a full efficiency audit with every installation.
What is the difference between MP Rotator heads and standard spray heads, and which is better for my lawn?
Standard spray heads release water in a fixed fan pattern at high volume, which can lead to runoff and pooling on Colorado's clay-heavy soils. MP Rotator heads deliver water in slow, rotating streams at a much lower application rate, giving the soil time to absorb moisture before the next pass. This makes them a better fit for the Front Range, where clay compaction is common and water restrictions are strict. AGT specifies MP Rotators for turf zones as a standard practice to improve efficiency and reduce waste.
When should I schedule spring irrigation activation, and why does timing matter in Colorado?
AGT schedules spring activation appointments in May to reduce the risk of a late-season freeze damaging pressurized lines. Colorado's weather can shift dramatically in April, with warm stretches followed by hard freezes well into spring. Activating too early and leaving water in the lines overnight during a freeze can crack pipes and damage heads, leading to costly repairs. Scheduling in May gives the system a reliable window to be pressurized, tested, and adjusted before peak watering season begins.
Do you handle the water-use documentation required by Boulder or Fort Collins for irrigation projects?
Yes. AGT manages all compliance documentation as part of the project scope. For properties in Boulder, that includes water-use reports required under Boulder 1041 regulations. For Fort Collins properties, we prepare documentation aligned with Fort Collins Water Wise requirements. After installation, every project receives CAD-based as-built plans that show valve locations and sleeve routes. These documents are useful for future maintenance, HOA reviews, and any municipal inspection that may be required.
What does compressed-air winterization involve, and is it necessary every year?
Winterization, also called a blow-out, uses compressed air to push all remaining water out of the irrigation lines before the first hard freeze. In Northern Colorado, leaving water in the lines through winter is a reliable way to crack pipes and damage heads due to the region's frequent freeze-thaw cycles. AGT recommends annual blow-outs for every system we maintain. The process is quick, and skipping it even once can result in repair costs that far exceed the cost of the service itself.
Can AGT retrofit my existing sprinkler system with a smart controller, or does the whole system need to be replaced?
In many cases, a smart controller retrofit is possible without replacing the full system. AGT can assess your existing infrastructure and upgrade the controller to an EPA WaterSense certified unit that adjusts run times based on real-time weather data and soil-moisture readings. If the existing heads or zone layout are inefficient, we will recommend targeted upgrades rather than a full replacement. A site assessment is the best way to determine what your current system needs to perform well under Colorado's water restrictions and soil conditions.
What warranty does AGT offer on irrigation installations, and what does it cover?
AGT provides a 2-year warranty on all irrigation installations, which is double the one-year industry standard. The warranty covers installed system components and workmanship. Because AGT also offers ongoing irrigation maintenance services, the same team that installs your system can monitor its performance through seasonal activations, mid-season audits, and fall winterizations. This continuity means issues are caught early and the system is kept in good working order throughout its service life.